Buy rock-guide.com ?
We are moving the project
rock-guide.com .
Are you interested in purchasing the domain
rock-guide.com ?
domain@kv-gmbh.de · 0541-91531010
Buy rock-guide.com ?
How are dogs docked?
Dogs are typically docked by a veterinarian or a trained professional using a procedure called docking. This involves the surgical removal of a portion of the dog's tail, usually done when the dog is just a few days old. The procedure is performed under general anesthesia to minimize pain and discomfort for the dog. After the tail is removed, the area is carefully stitched and the dog is monitored for any signs of complications during the healing process. It's important to note that docking is a controversial practice and is banned or restricted in some countries. **
Why are dogs docked?
Dogs are docked for various reasons, including breed standards, historical practices, and working purposes. Some breeds have docked tails or ears as part of their breed standard to maintain a certain appearance. In the past, docking was believed to prevent injuries in working dogs, such as hunting or herding breeds. However, the practice of docking is now controversial and banned in many countries due to concerns about animal welfare and unnecessary cosmetic procedures. **
Similar search terms for Docked
Top-Angebote
Products related to Docked:
-
Fender Telecaster Bass Blonde 1977 Vintage Electric Bass Guitar Vintage Blonde - RefurbishedThis is a Fender Telecaster Bass in Blonde finish. Made in the USA in 1977, this bass comes from the second run of Telecaster Basses which were available from '71 up to their discontinuation in 1979. The original version was introduced in 1968, and was largely a reissue of the original Precision Bass, featuring Telecaster inspired features such as the small headstock, solitary single-coil pickup and separate control plate. In 1971 the design was updated to include some of the well-known CBS era appointments including the bullet truss rod nut and 3-bolt micro-tilt neck plate. Additionally the pickguard was re-designed to incorporate the controls and Fender's new Seth Lover-designed Wide Range pickup. The model was discontinued in '79, but has enjoyed several subsequent reissues as part of the Squier Vintage Modified series & Fender's Vintera II lineup. Naturally, a bolt-on construction is employed, and comprises an Ash body, Maple neck and 20 fret Maple fingerboard. Chrome hardware is fitted including a top-loading 4-saddle bridge with cover and Fender open-geared tuning machines. A Fender Wide Range Bass humbucking pickup is installed on the 3-ply black/white/black pickguard, and is wired to master volume & tone controls. The Maple neck plays very comfortably, with what might be described as a ‘U’ profile. This fillsthe hand reassuringly whilst still allowing for comfortable reach in all registers and promoting ergonomic thumb positioning. The double cutaway body design offers extended access into the upper register which works well with the gloss finish to the rear of the neck, allowing for smooth navigation of the 34” scale. The frets are on the larger size, feeling similar to modern medium jumbos. These feel great under the fingers, and provide the versatility required for a wide range of playing styles and techniques. The Wide Range Bass humbucker installed in this guitar had only been introduced in 1971, so the Telecaster bass was one of the first instruments to feature the pickup as factory standard. The Wide Range Bass humbucker makes use of 4 magnetised pole pieces rather than the bar magnet and screw arrangement of the Gibson PAF. Due to the difficulty of machining AlNiCo (Aluminium/Nickel/Cobalt) into threaded rod magnets, Fender chose to use CuNiFe magnets (Copper/Nickel/Iron) instead. As they produce less output than AlNiCo magnets, more windings were needed to produce enough output- resulting in a much larger enclosure than a typical humbucker. The tone is full-bodied and warm, filling out the bottom of the mix very nicely whilst still capturing all the snap and attack of your playing. A seriously cool instrument in astonishing condition. This is because between ‘77 and ‘78 Fender switched from using a string-thru bridge, to a top loading bridge. This means the body of the bass does not have holes and ferrules for a string-thru bridge. Please see the pictures of the body and neck attached to the listing. Luthier Report Our ID:...2470,00 £*Shipping: 0,00 £Secure redirect to the provider
-
Fender Precision Bass Black 1978 Vintage Electric Bass Guitar Vintage Black - RefurbishedThis is a Fender Precision Bass in Black finish. The Fender Precision bass was launched in 1951, and despite how ubiquitous it is today, actually took a few years to catch on. Electric bass guitars were a new concept at the time, and Leo Fender had to travel to jazz clubs & concert halls to promote his new instrument face to face with musicians. Several design modifications were made throughout the '50s before a major revision in '57. The headstock was changed to resemble the Stratocaster rather than the Telecaster it had originally, and the pickguard was also changed to echo the design of the Strat. The iconic split single-coil pickup was added and the bridge was changed to a top-loading design with four steel saddles. Aside from offering Rosewood fingerboard & different pickup options in the following years, the P Bass' design has remained largely unchanged since 1957, and has gone down in history as the first commercially successful bass guitar design, with an immeasurable impact in the world of music. Made in the USA in 1978, this bass comes from the height of Fender's CBS era. Whilst CBS made several small design tweaks to Fender's instruments, the P Bass remained largely unchanged save for the use of a polyurethane finish. It is clear that this particular example has stood the test of time, and has been well played & enjoyed throughout its 47 year life. Naturally, a bolt-on construction is employed and comprises an Alder body, Maple neck and 20 fret Maple fingerboard. Chrome hardware is fitted including a top-loading bridge & split-post open-geared tuning machines. A split single-coil pickup is installed and wired to master volume & tone controls. The Maple neck plays very well, with a profile which might be described as a smooth and even 'C' shape, perhaps slightly thicker than you might find on Fender's modern offerings. Paired with the 7.25" fingerboard radius, this bass has a genuinely vintage specification. Along with the finish wear from the years of playing this bass has seen, the instrument feels very inspiring in the hands. Certainly, this bass has a 'mojo' to it which is often imitated on modern instruments but never equalled. Deep, rumbling lows will fill out your mix, whilst punchy mids and a sparkly top end will ensure that you have plenty of snap and attack to provide a lively and percussive performance. pushing your bass playing forward in the mix to create more urgency in the sound. The controls keep things simple; not intruding on the playing experience but still offering ample opportunities for tone shaping. Rolling the tone control down darkens the sound nicely, allowing you to blend more easily into the mix for a more mellow, quite jazzy tone. A well-loved bass that has worked hard throughout it's life but still has plenty to give.1890,00 £*Shipping: 0,00 £Secure redirect to the provider
-
Squier Affinity Series Precision Bass PJ Pack with Rumble 15 Amplifier Original - RefurbishedIdeal für Erstspieler, enthält das Squier Affinity PJ Bass Pack einen Affinity Series Precision Bass mit einem leistungsstarken Split-Coil P Bass Middle Pickup und einem knurrenden J Bass® Single-Coil Bridge Pickup. Ein hervorragendes Tor in die altehrwürdige Fender®-Familie, bietet die Squier® Affinity SeriesTM Precision Bass® PJ legendäres Design und einen typischen Ton für den aufstrebenden Bassist von heute. Dieser P Bass® verfügt über mehrere spielerfreundliche Verfeinerungen wie einen dünnen und leichten Körper, ein schlankes und komfortables "C" -förmiges Halsprofil und Vintage-Open-Gear-Tuning-Maschinen für eine glatte, genaue Abstimmung. Mit einem Squier Split Single-Coil P Bass Hals Pickup und einem Single-Coil J Bass® Bridge Pickup für eine Vielzahl von Tönen ist dieses Modell bereit, die Grundlage für jeden Spieler in jeder Phase zu legen. TONALE VERSATILITÄT Ausgestattet mit P Bass und J Bass Pickups bietet dieser Bass viel tonale Vielseitigkeit. Der Split-Single-Coil-P-Bass-Pickup bietet einen druckvollen, seismischen Ton, während der Single-Coil-J-Bass-Pickup einen klassischen Ton mit berühmtem gutturalen Mittelton und singendem High-End liefert. FENDER RUMME 15 AMP Perfekt für Übungseinheiten und Jamming, der Fender Rumble 15 Bassverstärker pumpt 15 Watt reinen Fender Basston.344,52 £*Shipping: 0,00 £Secure redirect to the provider
-
Fender Urge Stu Hamm black electric bass guitar black - RefurbishedThis is a Fender Urge Stu Hamm signature electric bass guitar in Black. Composed of a Poplar body, Bolt-on Maple neck and 24 fret Rosewood fingerboard. Other appointments include 4-Saddle bridge and Vintage Style tuning machines. A pair of Fender single-coil bass pickups are fitted and wired to stacked controls for volume and tone. The Maple neck plays very well, with the profile filling the hand nicely for a substantial yet articulate grip across the register. The 1.6" nut width is nice and traditional, offering ample string spacing for accurate fretting. The Rosewood fingerboard is pleasant under the fingers, and paired with the Medium Jumbo frets, there's a rock solid sensation under the fingers whilst enhancing the feel of vibrato and string bending techniques. The Fender single-coil pickups deliver classic original-era tone and power, with smooth rounded lows, clear and open mid range and a sweet treble response that captures the attack and aggression of your playing. The stacked control layout offers comprehensive control of your sound without over complicating things or getting in the way of the playing experience. Luthier Report Our ID: 1020726221000 Weight: 7.15lbs Serial: MSN44041 Aesthetic Condition: Headstock: Overall very good condition. The front and rear face edges demonstrate light scratching and indentation throughout. A notable indentation is apparent to the treble side of the cutaway, that has marked but not removed any of the finish. A small star and circular sticker residue are apparent to the front and rear face respectively. Neck: Overall very good condition. The rear of the neck demonstrates light indentations that cannot be felt by the hand in playing position, most notably in line with the 2nd and 5th frets. Any markings to the fingerboard are difficult to discern. Body: Overall good condition. All aspects of the body demonstrate light scratching, only visible under direct light at certain angles, with wear and hazing of the finish. The front face demonstrates wear to the finish to the treble side of the G string. The tip of the treble side horn demonstrates liquid staining, only visible under direct light, that could not be removed during our cleaning process. Consistent indentation is apparent to the sides, most notably at the bass and treble sides of the lower bout, where the finish has been pierced but not removed, not exposing the wood beneath. Condition of Frets: The frets demonstrate light signs of use, not affecting playability. There is considerable material remaining for any fret work the new owner may wish to perform. Current Set Up: Truss Rod: Fully functional. Truss rod tool (5mm) not included. Hardware: Fully functional and good condition. Light scratching and tarnishing is apparent to the tuners and bridge. Notable oxidisation is apparent to the bridge saddles and intonation screws. Notably scratching can be seen to the scratch plate. Structural: No concerns or issues to note. Height of the string from the...910,00 £*Shipping: 0,00 £Secure redirect to the provider
-
Can you connect an electric guitar or a bass to an amplifier for electronic drums?
Yes, you can connect an electric guitar or a bass to an amplifier for electronic drums. Most amplifiers have multiple input jacks, allowing you to connect different instruments simultaneously. This can be useful for practicing or performing with a full band setup. Just make sure to adjust the settings on the amplifier to accommodate the different instruments and ensure a balanced sound. **
-
Are there docked Dobermans in Switzerland?
Yes, there are docked Dobermans in Switzerland. However, the practice of docking dogs' tails has been banned in Switzerland since 1981, except for certain working dogs and in cases where the procedure is deemed necessary for the dog's health. The ban is part of Switzerland's animal welfare laws, which aim to protect animals from unnecessary suffering. Therefore, while docked Dobermans may still be found in Switzerland, the practice is not legally permitted except in specific circumstances. **
-
How can a dog be docked?
Docking a dog's tail is a surgical procedure that is typically performed when the dog is a few days old. The procedure involves removing a portion of the tail, usually by cutting or banding, and then stitching the wound. It is important to note that docking a dog's tail is a controversial practice and is illegal in many countries. It is typically done for cosmetic reasons or to prevent injury in certain working dog breeds. However, many animal welfare organizations and veterinarians oppose the practice, as it is considered unnecessary and can cause pain and potential long-term health issues for the dog. **
-
What is a docked tail in dogs?
A docked tail in dogs refers to the practice of surgically removing a portion of a dog's tail. This procedure is typically done when the dog is a puppy, and the length of the tail is shortened for various reasons such as breed standards, working purposes, or historical practices. Docking a dog's tail is a controversial topic, with some arguing that it is unnecessary and can cause pain and complications for the dog. **
Is the purchase of docked puppies prohibited?
The purchase of docked puppies is not prohibited in all places, but it is illegal in some countries and states. Docking is the practice of cutting off a portion of a puppy's tail for cosmetic reasons, and it is considered inhumane by many animal welfare organizations. Some countries have banned the practice altogether, while others have restrictions in place to prevent the unnecessary docking of puppies. It is important to research the laws and regulations in your area before purchasing a docked puppy. **
How do you register a docked puppy?
To register a docked puppy, you will need to first obtain the necessary paperwork from the breeder or seller. This may include a registration application form and a certificate of pedigree. Once you have the required documents, you can then submit them to the appropriate breed registry or kennel club, along with any required fees. The registry or club will then process the paperwork and issue a registration certificate for your docked puppy. It's important to ensure that the docking procedure was performed by a licensed veterinarian and in compliance with any relevant regulations or guidelines. **
Top-Angebote
Products related to Docked:
-
Sony Nintendo Switch 2 - Optimized for Handheld or Docked Play - Co-Op and Solo Modes - Nintendo Switch 2 ConsoleIn this unsettling tale, two orphans search for hope and redemption through a world where the main path is only part of the fragmented story. REANIMAL, from the original creators of Little Nightmares and Little Nightmares II, brings a more terrifying journey to Nintendo Switch 2. The game is optimized for handheld or docked home play, offering flexible play sessions. You can play in single-player mode or local or online co-op with friends, or go for a solitary, intensity-focused run. The game features a shared directed camera design that keeps you close to the action, amplifying claustrophobic moments and shared tension. Explore a world where each location reveals its own mystery and context, and experience an atmosphere-driven experience with tension-first design and a thick atmosphere that delivers an immersive horror mood.26,99 £*Shipping: 3,95 £Secure redirect to the provider
-
Fender Telecaster Bass Blonde 1977 Vintage Electric Bass Guitar Vintage Blonde - RefurbishedThis is a Fender Telecaster Bass in Blonde finish. Made in the USA in 1977, this bass comes from the second run of Telecaster Basses which were available from '71 up to their discontinuation in 1979. The original version was introduced in 1968, and was largely a reissue of the original Precision Bass, featuring Telecaster inspired features such as the small headstock, solitary single-coil pickup and separate control plate. In 1971 the design was updated to include some of the well-known CBS era appointments including the bullet truss rod nut and 3-bolt micro-tilt neck plate. Additionally the pickguard was re-designed to incorporate the controls and Fender's new Seth Lover-designed Wide Range pickup. The model was discontinued in '79, but has enjoyed several subsequent reissues as part of the Squier Vintage Modified series & Fender's Vintera II lineup. Naturally, a bolt-on construction is employed, and comprises an Ash body, Maple neck and 20 fret Maple fingerboard. Chrome hardware is fitted including a top-loading 4-saddle bridge with cover and Fender open-geared tuning machines. A Fender Wide Range Bass humbucking pickup is installed on the 3-ply black/white/black pickguard, and is wired to master volume & tone controls. The Maple neck plays very comfortably, with what might be described as a ‘U’ profile. This fillsthe hand reassuringly whilst still allowing for comfortable reach in all registers and promoting ergonomic thumb positioning. The double cutaway body design offers extended access into the upper register which works well with the gloss finish to the rear of the neck, allowing for smooth navigation of the 34” scale. The frets are on the larger size, feeling similar to modern medium jumbos. These feel great under the fingers, and provide the versatility required for a wide range of playing styles and techniques. The Wide Range Bass humbucker installed in this guitar had only been introduced in 1971, so the Telecaster bass was one of the first instruments to feature the pickup as factory standard. The Wide Range Bass humbucker makes use of 4 magnetised pole pieces rather than the bar magnet and screw arrangement of the Gibson PAF. Due to the difficulty of machining AlNiCo (Aluminium/Nickel/Cobalt) into threaded rod magnets, Fender chose to use CuNiFe magnets (Copper/Nickel/Iron) instead. As they produce less output than AlNiCo magnets, more windings were needed to produce enough output- resulting in a much larger enclosure than a typical humbucker. The tone is full-bodied and warm, filling out the bottom of the mix very nicely whilst still capturing all the snap and attack of your playing. A seriously cool instrument in astonishing condition. This is because between ‘77 and ‘78 Fender switched from using a string-thru bridge, to a top loading bridge. This means the body of the bass does not have holes and ferrules for a string-thru bridge. Please see the pictures of the body and neck attached to the listing. Luthier Report Our ID:...2470,00 £*Shipping: 0,00 £Secure redirect to the provider
-
Fender Precision Bass Black 1978 Vintage Electric Bass Guitar Vintage Black - RefurbishedThis is a Fender Precision Bass in Black finish. The Fender Precision bass was launched in 1951, and despite how ubiquitous it is today, actually took a few years to catch on. Electric bass guitars were a new concept at the time, and Leo Fender had to travel to jazz clubs & concert halls to promote his new instrument face to face with musicians. Several design modifications were made throughout the '50s before a major revision in '57. The headstock was changed to resemble the Stratocaster rather than the Telecaster it had originally, and the pickguard was also changed to echo the design of the Strat. The iconic split single-coil pickup was added and the bridge was changed to a top-loading design with four steel saddles. Aside from offering Rosewood fingerboard & different pickup options in the following years, the P Bass' design has remained largely unchanged since 1957, and has gone down in history as the first commercially successful bass guitar design, with an immeasurable impact in the world of music. Made in the USA in 1978, this bass comes from the height of Fender's CBS era. Whilst CBS made several small design tweaks to Fender's instruments, the P Bass remained largely unchanged save for the use of a polyurethane finish. It is clear that this particular example has stood the test of time, and has been well played & enjoyed throughout its 47 year life. Naturally, a bolt-on construction is employed and comprises an Alder body, Maple neck and 20 fret Maple fingerboard. Chrome hardware is fitted including a top-loading bridge & split-post open-geared tuning machines. A split single-coil pickup is installed and wired to master volume & tone controls. The Maple neck plays very well, with a profile which might be described as a smooth and even 'C' shape, perhaps slightly thicker than you might find on Fender's modern offerings. Paired with the 7.25" fingerboard radius, this bass has a genuinely vintage specification. Along with the finish wear from the years of playing this bass has seen, the instrument feels very inspiring in the hands. Certainly, this bass has a 'mojo' to it which is often imitated on modern instruments but never equalled. Deep, rumbling lows will fill out your mix, whilst punchy mids and a sparkly top end will ensure that you have plenty of snap and attack to provide a lively and percussive performance. pushing your bass playing forward in the mix to create more urgency in the sound. The controls keep things simple; not intruding on the playing experience but still offering ample opportunities for tone shaping. Rolling the tone control down darkens the sound nicely, allowing you to blend more easily into the mix for a more mellow, quite jazzy tone. A well-loved bass that has worked hard throughout it's life but still has plenty to give.1890,00 £*Shipping: 0,00 £Secure redirect to the provider
-
How are dogs docked?
Dogs are typically docked by a veterinarian or a trained professional using a procedure called docking. This involves the surgical removal of a portion of the dog's tail, usually done when the dog is just a few days old. The procedure is performed under general anesthesia to minimize pain and discomfort for the dog. After the tail is removed, the area is carefully stitched and the dog is monitored for any signs of complications during the healing process. It's important to note that docking is a controversial practice and is banned or restricted in some countries. **
-
Why are dogs docked?
Dogs are docked for various reasons, including breed standards, historical practices, and working purposes. Some breeds have docked tails or ears as part of their breed standard to maintain a certain appearance. In the past, docking was believed to prevent injuries in working dogs, such as hunting or herding breeds. However, the practice of docking is now controversial and banned in many countries due to concerns about animal welfare and unnecessary cosmetic procedures. **
-
Can you connect an electric guitar or a bass to an amplifier for electronic drums?
Yes, you can connect an electric guitar or a bass to an amplifier for electronic drums. Most amplifiers have multiple input jacks, allowing you to connect different instruments simultaneously. This can be useful for practicing or performing with a full band setup. Just make sure to adjust the settings on the amplifier to accommodate the different instruments and ensure a balanced sound. **
-
Are there docked Dobermans in Switzerland?
Yes, there are docked Dobermans in Switzerland. However, the practice of docking dogs' tails has been banned in Switzerland since 1981, except for certain working dogs and in cases where the procedure is deemed necessary for the dog's health. The ban is part of Switzerland's animal welfare laws, which aim to protect animals from unnecessary suffering. Therefore, while docked Dobermans may still be found in Switzerland, the practice is not legally permitted except in specific circumstances. **
Similar search terms for Docked
-
Squier Affinity Series Precision Bass PJ Pack with Rumble 15 Amplifier Original - RefurbishedIdeal für Erstspieler, enthält das Squier Affinity PJ Bass Pack einen Affinity Series Precision Bass mit einem leistungsstarken Split-Coil P Bass Middle Pickup und einem knurrenden J Bass® Single-Coil Bridge Pickup. Ein hervorragendes Tor in die altehrwürdige Fender®-Familie, bietet die Squier® Affinity SeriesTM Precision Bass® PJ legendäres Design und einen typischen Ton für den aufstrebenden Bassist von heute. Dieser P Bass® verfügt über mehrere spielerfreundliche Verfeinerungen wie einen dünnen und leichten Körper, ein schlankes und komfortables "C" -förmiges Halsprofil und Vintage-Open-Gear-Tuning-Maschinen für eine glatte, genaue Abstimmung. Mit einem Squier Split Single-Coil P Bass Hals Pickup und einem Single-Coil J Bass® Bridge Pickup für eine Vielzahl von Tönen ist dieses Modell bereit, die Grundlage für jeden Spieler in jeder Phase zu legen. TONALE VERSATILITÄT Ausgestattet mit P Bass und J Bass Pickups bietet dieser Bass viel tonale Vielseitigkeit. Der Split-Single-Coil-P-Bass-Pickup bietet einen druckvollen, seismischen Ton, während der Single-Coil-J-Bass-Pickup einen klassischen Ton mit berühmtem gutturalen Mittelton und singendem High-End liefert. FENDER RUMME 15 AMP Perfekt für Übungseinheiten und Jamming, der Fender Rumble 15 Bassverstärker pumpt 15 Watt reinen Fender Basston.344,52 £*Shipping: 0,00 £Secure redirect to the provider
-
Fender Urge Stu Hamm black electric bass guitar black - RefurbishedThis is a Fender Urge Stu Hamm signature electric bass guitar in Black. Composed of a Poplar body, Bolt-on Maple neck and 24 fret Rosewood fingerboard. Other appointments include 4-Saddle bridge and Vintage Style tuning machines. A pair of Fender single-coil bass pickups are fitted and wired to stacked controls for volume and tone. The Maple neck plays very well, with the profile filling the hand nicely for a substantial yet articulate grip across the register. The 1.6" nut width is nice and traditional, offering ample string spacing for accurate fretting. The Rosewood fingerboard is pleasant under the fingers, and paired with the Medium Jumbo frets, there's a rock solid sensation under the fingers whilst enhancing the feel of vibrato and string bending techniques. The Fender single-coil pickups deliver classic original-era tone and power, with smooth rounded lows, clear and open mid range and a sweet treble response that captures the attack and aggression of your playing. The stacked control layout offers comprehensive control of your sound without over complicating things or getting in the way of the playing experience. Luthier Report Our ID: 1020726221000 Weight: 7.15lbs Serial: MSN44041 Aesthetic Condition: Headstock: Overall very good condition. The front and rear face edges demonstrate light scratching and indentation throughout. A notable indentation is apparent to the treble side of the cutaway, that has marked but not removed any of the finish. A small star and circular sticker residue are apparent to the front and rear face respectively. Neck: Overall very good condition. The rear of the neck demonstrates light indentations that cannot be felt by the hand in playing position, most notably in line with the 2nd and 5th frets. Any markings to the fingerboard are difficult to discern. Body: Overall good condition. All aspects of the body demonstrate light scratching, only visible under direct light at certain angles, with wear and hazing of the finish. The front face demonstrates wear to the finish to the treble side of the G string. The tip of the treble side horn demonstrates liquid staining, only visible under direct light, that could not be removed during our cleaning process. Consistent indentation is apparent to the sides, most notably at the bass and treble sides of the lower bout, where the finish has been pierced but not removed, not exposing the wood beneath. Condition of Frets: The frets demonstrate light signs of use, not affecting playability. There is considerable material remaining for any fret work the new owner may wish to perform. Current Set Up: Truss Rod: Fully functional. Truss rod tool (5mm) not included. Hardware: Fully functional and good condition. Light scratching and tarnishing is apparent to the tuners and bridge. Notable oxidisation is apparent to the bridge saddles and intonation screws. Notably scratching can be seen to the scratch plate. Structural: No concerns or issues to note. Height of the string from the...910,00 £*Shipping: 0,00 £Secure redirect to the provider
-
Scholastic 100 English Lessons: Planning Guide (100 Lessons - 2014 Curriculum)Master the Curriculum with Scholastic's 100 Lessons. Scholastic's acclaimed 100 Lessons series is here to help your school prepare. Trusted by teachers for 15 years and selling more than one million copies, 100 Lessons is fully in line with the Curriculum objectives. Our new 100 Lessons and Planning Guides will make planning and teaching the new requirements simple and stress-free. Understand the requirements and plan with confidence for all six years Long- and medium-term planning and progression, ideal for subject coordinators Get a clear overview with simple week-by-week breakdowns on how to create units of work Includes a FREE A2 poster that gives an overview of progression and a CD-ROM full of editable planning grids View sample resources at www.scholastic.co.uk/100lessons9,99 £*Shipping: 2,99 £Secure redirect to the provider
-
Trent Austin Design Multi Guitar Floor Stand, Adjustable Guitar Rack for Acoustic, Electric Guitar & Bass, Rustic Brown Black;Brown 28"This guitar stand measures 38 x 30 x 118 cm (L x W x H) and can hold up to 5 instruments up to 110 cm in height. The top shelf offers convenient storage for guitar accessories including straps, strings, tuners, capos, and maintenance kits. Compatible with most string instruments such as acoustic guitars, electric guitars, bass guitars, banjos, mandolins, and ukuleles, ideal for displaying your instrument collection in style.. Made of high-quality engineered wood with a sturdy frame for stable support. Metal holders are lined with soft EVA padding to protect guitar necks and surfaces from scratches and damage.. Suitable for music rooms, home studios, living areas, and display corners. Also a great gift choice for music lovers for Christmas, Valentine’s Day, Thanksgiving, and other holidays.. Brand Name: Trent Austin Design.112,99 £*Shipping: 0,00 £Secure redirect to the provider
-
How can a dog be docked?
Docking a dog's tail is a surgical procedure that is typically performed when the dog is a few days old. The procedure involves removing a portion of the tail, usually by cutting or banding, and then stitching the wound. It is important to note that docking a dog's tail is a controversial practice and is illegal in many countries. It is typically done for cosmetic reasons or to prevent injury in certain working dog breeds. However, many animal welfare organizations and veterinarians oppose the practice, as it is considered unnecessary and can cause pain and potential long-term health issues for the dog. **
-
What is a docked tail in dogs?
A docked tail in dogs refers to the practice of surgically removing a portion of a dog's tail. This procedure is typically done when the dog is a puppy, and the length of the tail is shortened for various reasons such as breed standards, working purposes, or historical practices. Docking a dog's tail is a controversial topic, with some arguing that it is unnecessary and can cause pain and complications for the dog. **
-
Is the purchase of docked puppies prohibited?
The purchase of docked puppies is not prohibited in all places, but it is illegal in some countries and states. Docking is the practice of cutting off a portion of a puppy's tail for cosmetic reasons, and it is considered inhumane by many animal welfare organizations. Some countries have banned the practice altogether, while others have restrictions in place to prevent the unnecessary docking of puppies. It is important to research the laws and regulations in your area before purchasing a docked puppy. **
-
How do you register a docked puppy?
To register a docked puppy, you will need to first obtain the necessary paperwork from the breeder or seller. This may include a registration application form and a certificate of pedigree. Once you have the required documents, you can then submit them to the appropriate breed registry or kennel club, along with any required fees. The registry or club will then process the paperwork and issue a registration certificate for your docked puppy. It's important to ensure that the docking procedure was performed by a licensed veterinarian and in compliance with any relevant regulations or guidelines. **
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases. ** Note: Parts of this content were created by AI.