Products related to Power:
-
High Power Slave Amplifier 240WRMS
RS Series 100V Line Slave Amplifier 240WRMS High power 100V line slave amplifiers in a 2U rack-mountable housing. Slave inputs can be connected from Adastra RM series mixer amplifiers and slave outputs onto further RS slaves. Master volume control governs output level to either low impedance or 100V speakers. Designed to power medium to large installations from a mixer output or expand existing systems. Features: RCA slave inputs and outputs 8 ohms and 100V line speaker output Peak and signal LEDs 2U 19" rack mountable Supplied with rack-mount ears Technical specification: Power supply - 110/240Vac, 50/60Hz (IEC) Input - RCA slave in Output : signal - 2 x RCA Outputs : speaker - 100V and 8 ohms Controls - Master volume THD - 1.0% DC power - 24Vdc (screw terminals) Power : output 240Wrms Dimensions - 433 x 320 x 89mm Weight - 10.06kg
Price: 249 € | Shipping*: 0.00 € -
W Audio EPX 1200 Power Amplifier
W Audio EPX 1200 Power Amplifier W Audio have designed the EPX Series power amplifiers to work perfectly with most loudspeaker systems. These power amplifiers feature several power outputs all with extended reliability and superior stability for a wide range of applications. Features: 2 x 400Wrms @ 8Ω 2 x 600Wrms @ 4Ω Bridge 1200Wrms @ 8Ω Frequency response: 20Hz to 20kHz Input sensitivity: 0.775V / 1.0V / 1.44V Protection circuits: Soft start, limit, thermal, short circuit, overload, DC fault protection, AC power supply fuse and circuit breaker LED indicators: Power, protect, clip, stereo, parallel and bridge Input connections: 2 x XLR sockets, 2 x 1/4 jack sockets, 1 x powerCON mains input Output connections: 2 x speakON connectors, 2 pairs of binding posts, 1 x speakON bridge connector Additional features: Switchable stereo, parallel & bridge. High pass & low pass filters, limiter and ground lift Specification: Power supply: AC 240V/50Hz Dimensions: 87 x 481 x 450mm Weight: 14.8kg
Price: 319 € | Shipping*: 0.00 € -
QTX QA1000 Stereo Power Amplifier 1000W
Professional dual channel power amplifiers delivering high quality, dependable performance at an accessible price. Design of these workhorse amps has been focused upon high power delivery without over-complicated features adding excessive costs. Yet still, these units are furnished with multiple connection possibilities and self protection circuitry to ensure that they will deliver, whatever the application. Features: High power delivery Overheat/overload protection Multiple input and output connection types Balanced and unbalanced inputs 2U 19" rack mountable Power supply 230Vac 50Hz THD 0.25% SNR 90dB Inputs Combo (6.3mm jack + XLR) and RCA Outputs Speakon, 6.3mm jack and 4mm binding posts. Technical Specifications: Model QA1000 Power Max @ 4 Ohms 2 x 500W Power RMS @ 4 Ohms 2 x 250W Power RMS @ 8 Ohms 2 x 170W Dimensions 88 x 482 x 340mm Weight 9.1kg
Price: 210 € | Shipping*: 0.00 € -
SMSL A100 Bluetooth Power Amplifier 2 X 80W
SMSL A100 Bluetooth Power Amplifier 2 X 80W Compact Bluetooth Amplifier from SMSL. The A100 is a great amp to be paired with 2 or 4 speakers and a subwoofer, great for living room entertainment which can also be connected to you TV via the headphone jack. Features: German Infineon's new technology class D power amplifier chip, higher quality, efficiency up to 92%, further reducing power consumption; USB audio input and support for driver-free use; Built-in 2 sets of subwoofer signal pre-output, for easy connection with active subwoofer system 2.1 or 2.2; Bluetooth 5.0 receiver, Great sound quality, longer transmission distance; Built-in low-noise, big-power audio dedicated switching power supply to ensure continuous powering; A large number of audio grade components are used to enhance the sound experience; High quality gold-plated input and output terminals; Perfect protection circuit for overheating, overcurrent, etc. High quality power adapter specially designed for audio. Specification: Inputs - USB , Bluetooth , LINE IN THD+N - 0.005% SNR - 103dB Channel separation - 88dB Output Power - 80Wx2(4Ω) / 40Wx2(8Ω) Input sensitivity/input impedance - 180mV / 22kΩ Power Consumption - 35W(Normal Volume) Size - 150x43x165mm / 5.09x1.69x6.45in(WxHxD) Weight - 0.6 kg / 1.32Ibs
Price: 119 € | Shipping*: 0.00 €
-
Can you connect an electric guitar or a bass to an amplifier for electronic drums?
Yes, you can connect an electric guitar or a bass to an amplifier for electronic drums. Most amplifiers have multiple input jacks, allowing you to connect different instruments simultaneously. This can be useful for practicing or performing with a full band setup. Just make sure to adjust the settings on the amplifier to accommodate the different instruments and ensure a balanced sound.
-
Which guitar amplifier is suitable for German power outlets?
A guitar amplifier that is suitable for German power outlets would need to be compatible with the voltage and frequency used in Germany, which is typically 230 volts at 50 Hz. It is recommended to look for amplifiers that have a switchable voltage option or are specifically designed to work with European power outlets. Additionally, using a power adapter or converter may also be necessary to ensure the amplifier functions properly with German power outlets.
-
Which guitar amplifier is suitable for German power sockets?
Any guitar amplifier that is compatible with the voltage and frequency of German power sockets (230V, 50Hz) would be suitable. It is important to check the specifications of the amplifier to ensure that it can handle the electrical requirements of the German power supply. Additionally, using a power adapter or voltage converter may be necessary if the amplifier is not specifically designed for use with German power sockets.
-
How can you power a guitar amplifier with a battery?
You can power a guitar amplifier with a battery by using a power inverter. A power inverter converts the DC power from the battery into AC power, which is what the amplifier needs to operate. You will need to make sure that the power inverter can handle the wattage requirements of the amplifier, and also consider the capacity of the battery to ensure it can provide enough power for the desired duration. Additionally, you will need to connect the inverter to the amplifier using the appropriate cables and connectors.
Similar search terms for Power:
-
PA-1960 High Power 100V PA Amplifier 960W
PA-1960 High Power 100V PA Amplifier 960W The PA-1960 High Power 100V PA Amplifier 960W has a unique feature to take a slave input direct from a 100V source. The amplifier can also be used as 50V, 60V, 75V and 85V configurations and features 2 insertion facilities at the rear side for optional modules: fault detection and fault monitoring. Features: Additional, adjustable priority input with switchable priority function 100 V slave input for inserting the amplifier into a 100 V speaker line Switchable 400 Hz high-pass filter 6 dB/oct. 2 insertion facilities at the rear side for optional modules with the following features: PA-6FD: fault detection module PA-6FM: fault monitoring module Connection for external on/off switch (remote start) Temperature-controlled fan, continuously adjustable LED display for fault, protect, clip, signal, priority Mains operation or 24 V emergency power operation Technical specification: Output power 1 x 960 WRMS Input sensitivity 0.775 V/60 kΩ, bal. Output impedance 75 V/5.6 Ω, 85 V/7.2 Ω, 100 V/10 Ω Frequency range 35-20,000 Hz S/N ratio > 100 dB, A-weighted THD < 0.4 % High-pass filter 400 Hz, 6 dB/oct. Admiss. ambient temp. 0-40 °C Power supply 230 V˜/50 Hz/2,600 VA, 24 V DC current /80 A Dimensions 483x133x374 mm, 3 RS Weight 25 kg Connections: Signal input screw terminals Speaker output screw terminals
Price: 1369 € | Shipping*: 0.00 € -
Citronic QP1600 Quad Power Amplifier 4 x 400W
Citronic QP Series Quad Power Amplifiers A range of quad power amplifiers with 4 fully independent channels and individual volume controls. Fully balanced line inputs and parallel outputs allow signal daisy-chaining to further amplifiers. Designed as a cost effective and efficient solution for multi speaker installations where sound quality is paramount. Features: Fully balanced signal path Stable down to 2 Ohms 2U rack-mountable Specification: Power supply 230Vac, 50Hz (IEC) Input : line 4 x XLRF balanced Output : line 4 x XLRM (parallel from inputs) Input impedance 20k Ohms Frequency response 5Hz - 50kHz THD 0.05% Slew rate 40V/usec S/N ratio 103dB Controls 4 x channel gain Speaker outputs 4 x SPK connectors Circuit protection Short-circuit, DC, overload, soft-start Dimensions: 483 x 439 x 88mm
Price: 349.99 € | Shipping*: 0.00 € -
Apart Audio REVAMP4100 Quad Power Amplifier 4 x 100W
Biamp REVAMP4100 4-Channel Class-D Power Amplifier Overview The Biamp REVAMP4100 is a professional 4-channel Class-D power amplifier designed for both commercial and high-end home audio applications. With efficient power management and advanced protection circuits, it delivers reliable performance with high-fidelity sound quality. Its convection-cooled design ensures silent operation, making it ideal for installations where noise levels need to be kept to a minimum. Design and Build Quality Built with a sturdy 19-inch, 1U steel chassis, the REVAMP4100 ensures durability and reliability in rack-mounted setups. The fanless convection cooling system prevents overheating while maintaining silent operation. The front panel features intuitive controls and LED indicators for each channel, allowing for easy monitoring and adjustments. Key Technologies and Features Class-D Amplification: Ensures high efficiency, lower heat generation, and reliable operation over extended periods. Bridgeable Channels: Channels can be combined for higher power output, catering to different installation needs. Advanced Protection Circuitry: Includes DC protection, overcurrent protection, overtemperature protection, and input overload protection. Fanless Convection Cooling: Operates silently, making it suitable for noise-sensitive environments. Universal Power Supply: Supports 100-240V~ 50/60Hz for global compatibility. Specifications Specification Details Output Power RMS @ 4 ohms 4 x 100 W Output Power RMS @ 8 ohms 4 x 50 W Output Power Bridged @ 8 ohms 2 x 200 W Frequency Response 20 Hz - 22 kHz (+0 / -3 dB) Damping Factor >50 @ 1kHz (all channels) Cooling System Convection cooling (fanless) Performance and User Experience The Biamp REVAMP4100 delivers clean, powerful audio output with minimal distortion, making it an excellent choice for demanding audio applications. The fanless convection cooling system ensures silent operation, making it suitable for noise-sensitive environments such as studios, boardrooms and home theatres. With versatile connectivity options and built-in protection circuits, it is a reliable solution for both small and large installations. Q&A Section Q: Can the REVAMP4100 be used for both home and professional audio systems? A: Yes, the REVAMP4100 is designed for both professional installations and high-fidelity home audio setups, providing excellent sound quality and reliability. Q: Does the amplifier require an external cooling system? A: No, the REVAMP4100 features a convection cooling system, eliminating the need for internal fans and ensuring silent operation. Q: Can the channels be bridged for higher power output? A: Yes, the amplifier supports channel bridging, enabling two 200W channels at 8 ohms to meet higher power demands. Q: What safety features does the REVAMP4100 include? A: The amplifier is equipped with multiple protection circuits, including DC protection, over-current protection, over-temperature protection and input overload protection. Q: What type of connections does the REVAMP4100 support? A: The amplifier offers both balanced (Euroblock) and unbalanced (RCA) inputs, along with pass-through options, allowing seamless integration into various setups.
Price: 449 € | Shipping*: 0.00 € -
AD18 Stereo Power Amplifier With Bluetooth 2 x 80W
HiFi Audio Stereo Power Amplifier With Bluetooth Sub Out Compact Full Digital Class D Bluetooth Amplifier. Specification: Type: Full digital decoding amplifier Input port: USB/AUX/3.5mm Coaxial and Optical 1/Bluetooth/Optical 2 Output Port: Amplifier output port/3.5mm Headphone port/Subwoofer Voltage: 24V Output power:80W x 2 SNR(Signal to Noise): 90dB THD+N: 0.04% Output consumption: 50W Standby power:0.8w EQ adjustment: 7 Headphone output(32ohm): 53mW & THD=0.04% USB sampling rate: 24bit 96kHz Optical sampling rate:44.1kHz-192kHz Coaxial sampling rate:44.1kHz-192kHz Treble adjustment range: ±8db,Bass adjustment range:±8db Net Weight: 572g Gross Weight:1585g Machine Size: 172*51*85mm
Price: 149 € | Shipping*: 0.00 €
-
Which songs include bass, drums, keyboard, acoustic and electric guitar?
Some songs that include bass, drums, keyboard, acoustic, and electric guitar are "Hotel California" by The Eagles, "Bohemian Rhapsody" by Queen, and "Stairway to Heaven" by Led Zeppelin. These songs showcase the diverse range of instruments working together to create a rich and dynamic sound. The combination of bass, drums, keyboard, acoustic, and electric guitar in these songs adds layers of texture and complexity to the music.
-
Which songs contain bass, drums, keyboard, acoustic and electric guitar?
Some examples of songs that contain bass, drums, keyboard, acoustic, and electric guitar are "Hotel California" by The Eagles, "Bohemian Rhapsody" by Queen, and "Stairway to Heaven" by Led Zeppelin. These songs showcase the full range of instruments and demonstrate how each contributes to the overall sound and feel of the music. The combination of bass, drums, keyboard, acoustic, and electric guitar creates a rich and dynamic musical texture that is both engaging and memorable.
-
How can you operate a guitar amplifier with a power station?
To operate a guitar amplifier with a power station, you will need to connect the amplifier to the power station using a power cable. Make sure to check the power requirements of the amplifier and ensure that the power station can provide the necessary voltage and current. Once connected, you can turn on the power station to supply electricity to the amplifier, allowing you to use it for playing your guitar. Always follow the safety guidelines and instructions provided by the manufacturer when operating any electrical equipment.
-
"Is the power amplifier receiving insufficient power?"
To determine if the power amplifier is receiving insufficient power, you can check the power supply to the amplifier to ensure it is delivering the correct voltage and current. You can also check for any loose connections or damaged cables that may be impeding the flow of power to the amplifier. Additionally, you can use a multimeter to measure the voltage at the input of the amplifier to see if it matches the required specifications. If the power supply and connections are all in good condition, then the amplifier may be receiving sufficient power and the issue may lie elsewhere.
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases.